GENERAL PLAN CONSISTENCY CHECKLIST
Single-Family
Residential Projects & Accessory Structures
On June 17, 2008 the Board of Supervisors adopted
Ordinance No. 4777, amending the
previous ordinance establishing an interim General Plan Consistency Review
process for building and grading permits and amended Policy
2.2.5.20. This ordinance and policy
amendment raised the threshold for which residential development shall
be subject to the review process to ensure that these permits are consistent
with the general plan. This review requirement applies to all building
or grading permit applications with 4,000 square feet or more of living
area or 20,000 square feet of disturbed area, or if the site is located
with the Important Biological Corridor overlay designation as shown
on the Land
Use Diagram of the General Plan. The review process does not
apply to permits issued in accordance with an approved development agreement.
The checklist below has been created to implement
this interim General Plan Consistency Review process. Upon entering your
assessor parcel number, the checklist will automatically generate responses
to many of the listed issues to the extent the data is available from
County records. For the remaining items, you will be asked to respond
to the information requested to the best of your ability based on your
knowledge of your property and proposed project. The checklist includes
numerous links to pertinent information available on various State and
County internet sites that will help you to complete the checklist. If
a response to an item on the checklist triggers a potential General Plan
policy inconsistency, please discuss the issue with a planner in the Development
Services Department. The planner will be able to assist you to understand
the options available to you to resolve the policy inconsistency.
In some cases, a project may need to be
revised to ensure consistency. If that is not possible, due to unique
features of the site, the project may be reviewed as a discretionary project,
subject to environmental review pursuant to the California
Environmental Quality Act (CEQA), with mitigation measures applied
to reduce the impact associated with the inconsistency. This will typically
require the completion of an initial study and preparation of a mitigated
negative declaration by the County. A planner will be able to help you
determine if discretionary review is necessary for your project.
To view information specific to your
parcel, enter your Parcel Number below. Please note that some information
is not available online at this time.
Note: If
you would like to review the general plan policies that are contained
in the checklist without entering a specific parcel number...click
here [.pdf]
|